
# ThinSHUFFLE™ Flex Circuit MPO Shuffle Assemblies


Mesh MPO shuffle routed on a thin, flexible substrate. 4x4 on MPO-8 or 8x8 on MPO-16, with machine-placed routing and colour-identified upstream legs for each switch fabric.


ThinSHUFFLE™ flex circuit MPO shuffle assemblies route every fibre of a mesh shuffle on a thin, flexible substrate. Individual fibres are laid down and bonded to the film by machine, then sealed under a conformal coating, so the full cross-connect between input and output MPO legs is fixed in a single flat circuit rather than in a moulded box or a bundle of loose fibres.
Because the routing is placed by machine, every assembly carries the same lane map with no hand-routing errors, and the fibres hold their position and bend radius in service. The substrate is only a few hundred microns thick and can be flexed, folded or mounted through its corner holes, so it fits inside cassettes, switch chassis, sleds and backplanes where a conventional shuffle box will not.
Standard configurations include 4x4 on MPO-8 (32 fibre) and 8x8 on MPO-16 (128 fibre), for 400G, 800G and 1.6T leaf-spine and AI cluster fabrics.
Assemblies use bend-insensitive single-mode G.657.A1 fibre with ScaleFibre Low Loss MPO connectors, and are factory terminated and 100% tested for insertion loss and return loss before shipment. Custom lane maps, port counts and substrate outlines are available on request.


## Images


* ![ThinSHUFFLE™ 4x4 Flex Circuit MPO Shuffle Assembly, Single Mode (G.657.A1)](scalefibre-thinshuffle-4x4-flex-circuit-mpo-shuffle.webp)

* ![ThinSHUFFLE™ 8x8 Flex Circuit MPO Shuffle with MPO-16 Connectors](thinshuffle-8x8-flex-circuit-mpo-shuffle-colour-coded-legs.webp)

* ![ThinSHUFFLE™ 8x8 Flex Circuit Showing Routed Fibre Mesh on Substrate](thinshuffle-8x8-flex-circuit-routed-fibre-mesh.webp)

* ![ThinSHUFFLE™ 4x4 Flex Circuit Showing Routed Fibre Mesh on Substrate](thinshuffle-4x4-flex-circuit-routed-fibre-mesh.webp)

* ![ThinSHUFFLE™ 8x8 Substrate Flexed](thinshuffle-8x8-substrate-flexed.webp)

* ![ThinSHUFFLE™ 4x4 Substrate Flexed](thinshuffle-4x4-substrate-flexed.webp)

* ![ThinSHUFFLE™ Flex Circuit, 3 × MPO-8 to 2 × MPO-12 Conversion](thinshuffle-3x-mpo-8-to-2x-mpo-12-flex-circuit-shuffle.webp)

* ![ThinSHUFFLE™ 3 × MPO-8 to 2 × MPO-12 Substrate Flexed](thinshuffle-3x-mpo-8-to-2x-mpo-12-substrate-flexed.webp)



## Features


* 4x4 or 8x8 mesh shuffle, every MPO port reaches every fabric
* Fibres bonded to a thin, flexible substrate under conformal coating
* Machine-placed routing for a repeatable lane map and controlled bend radius
* Fits cassettes, chassis, sleds and backplanes where a shuffle box will not
* Upstream legs colour coded per fabric in TIA-598 order
* Factory terminated and 100% IL/RL tested

## Configurations
### Single-mode (G.657.A1), 4x4 Mesh Duplex

| Part Number | Description |
| --- | --- |
| FC-S7-32-4MP8F-MD | Flexible optic circuit, Single Mode (G.657.A1), 32 fibre, 4 x MPO-8 female each end, mesh (any-to-any), duplex |
### Single-mode (G.657.A1), 8x8 Mesh Duplex

| Part Number | Description |
| --- | --- |
| FC-S7-128-8MP16F-MD | Flexible optic circuit, Single Mode (G.657.A1), 128 fibre, 8 x MPO-16 female each end, mesh (any-to-any), duplex |
### Single-mode (G.657.A1), Base-8 to Base-12 Conversion

| Part Number | Description |
| --- | --- |
| FC-S7-24-3MP8F-2MPOF-B | Flexible optic circuit, Single Mode (G.657.A1), 24 fibre, 3 x MPO-8 female to 2 x MPO-12 female, Base-8 to Base-12 conversion |


## Specifications
### General

| Item | Value |
| --- | --- |
| Configuration | 4x4 mesh shuffle (4 × MPO-8 each side), 8x8 mesh shuffle (8 × MPO-16 each side), or Base-8 to Base-12 conversion (3 × MPO-8 to 2 × MPO-12). Other port counts custom-routed on request |
| Fibre Count | 32 fibres (4x4, MPO-8), 128 fibres (8x8, MPO-16) or 24 fibres (3 × MPO-8 to 2 × MPO-12) |
| Lane Mapping | Mesh, duplex: each leg distributes its duplex lanes across all legs on the opposite side. Custom lane maps available on request |
| Leg Identification | Upstream legs colour coded in TIA-598 order: blue, orange, green and brown (4x4); blue, orange, green, brown, slate, white, red and black (8x8) |
| Format | Flexible optical circuit with corner mounting holes, for mounting in cassettes, chassis, sleds or backplanes |
### Technical Specs

| Item | Value |
| --- | --- |
| Substrate | Flexible film, fibres sealed under conformal coating |
| Fibre Routing | Machine-placed, single layer, controlled minimum bend radius |
| Fibre Type | Single-mode G.657.A1 |
| Connectors | MPO-8, MPO-12 or MPO-16, Female or Male, APC polish |
| Connector Polish Angle | 8° APC (Angled Physical Contact) |
| Insertion Loss | ≤0.35 dB per MPO connector |
| Return Loss | ≥60 dB |
| Operating Temperature | -20°C to +70°C |
| Compliance | RoHS, REACH |

## Market




